The powerful cleaner for Silicon / NITRO Based / TED-SILICONE-OUT™
Highly efficient professional cleaning product. Removes silicone residues. Acts fast without interfering with the surface structure.
Technical Data:
Base - mixture of natural solvents and terpenes.
Consistency - Liquid
Solvability does not dissolve in water, does dissolve in organic solvents.
Product: SILICONE REMOVER is a ready to use liquid based on natural solvents. It is used to remove polymerized sealants like silicones, MS-polymers, Acrylics and polybutenes.
Characteristics: quick action, does not drip, pleasant citric smell.
Applications: removal of old sealants from different substrates
Removal and cleaning of old joints before resealing removal of sealant stains.
Colour : clear
Packaging: pot 100 ml, 300 ml, 400 ml, 5L, 25L
Shelf life: 12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°.
Surfaces: Type: all usual surfaces (metal, glass, wood, some plastics,...). When used on plastics and coatings we recommend a preliminary compatibility test to ensure that these substrates will not be attacked by the product.
State of Surface: clean and dry
Preparation: none.
Working method: Remove as much of the sealant as possible with acutter. Apply a layer of silicone remover with the brush or spray it on. Leave to penetrate for 2-3 minutes. Remove sealant stains with a scraper and dry towel. Check if no sealant rests remain. If necessary, repeat application.
A new sealant layer can be applied after the substrate has dried completely. Health- and Safety Recommendation: Apply the usual industrial hygiene.
Make sure there is sufficient ventilation when working with the Silicone Remover.
Wear gloves and safety glasses.
When Silicone Remover comes in contact with skin, wash with water and soap. Consult the label for
more information.
Remarks:
Can leave stains on porous surfaces. When the Silicone Remover comes into contact with water its active components are broken down and the product becomes useless. Conduct a small test to ensure compatibility with substrates like plastics and paint layers.
Side effects:
It has no side effects in the form of discoloration, mechanical and chemical damage of the cleaned surfaces. BEFORE USING ALWAYS TEST ON SMALL, LESS EXPOSED AREA.
How to use:
After spraying the preparation on cleaned surface, wait for 5 to 10 minutes depending on the layer of contamination, wipe with a cloth or a hard-bristle brush. If contamination persists repeat the whole procedure.
Applicability:
Bitumen manufacturers
Contruction companies
Safety information:
Product is flammable
Product contains mineral ingredients which may be harmful to the skin and eyes..
Does not pose a health or environmental hazard.
Keep out of reach of CHILDREN !!!
Precautions:
Apply the required personal protective equipment (gloves). In case of contact with eyes, rinse with plenty of water. If swallowed, immediately seek for medical advice.
Storage:
Store in a closed container..
Store in a cool place, at + 5°C to + 25°C
Shelf life: 12 months from the date of production
PROTECT FROM CHILDREN !!!